Chapter 76: Aluminum and articles thereof

7601: Unwrought aluminum

Code	Description	General Rate	Column 2 Rate	Special Rate	Units of Quantity
7601.10	Aluminum, not alloyed
7601.10.30.00	· Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils	2.6%	18.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7601.10.60	· Other	Free	11%
7601.10.60.30	· · Of greater than 99.8 percent aluminum	Free	11%		kg
7601.10.60.90	· · Other	Free	11%		kg
7601.20	Aluminum alloys
7601.20.30.00	· Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils	2.6%	18.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
	· Other
7601.20.60.00	· · Containing 25 percent or more by weight of silicon	2.1%	25%	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7601.20.90	· · Other	Free	10.5%
7601.20.90.30	· · · Aluminum vanadium master alloy	Free	10.5%		kg
	· · · Other
7601.20.90.45	· · · · Of uniform circular cross section throughout its length, the foregoing comprised of billets, not in coils	Free	10.5%		kg
7601.20.90.60	· · · · Other, containing 0.03 percent or more by weight of lead (secondary aluminum)	Free	10.5%		kg
	· · · · Other
7601.20.90.75	· · · · · Remelt scrap ingot	Free	10.5%		kg
7601.20.90.80	· · · · · Sheet ingot (slab) of a kind described in statistical note 3 to this chapter	Free	10.5%		kg
7601.20.90.85	· · · · · Foundry ingot of a kind described in statistical note 4 to this chapter	Free	10.5%		kg
7601.20.90.95	· · · · · Other	Free	10.5%		kg

76020000: Aluminum waste and scrap

Code	Description	General Rate	Column 2 Rate	Units of Quantity
7602.00.00.35	Recyclable beverage containers	Free	Free	kg
7602.00.00.95	Recyclable aluminum from industrial processes, including turnings, borings, shavings, filings, clippings and chips	Free	Free	kg
7602.00.00.97	Other recyclable aluminum	Free	Free	kg
7602.00.00.98	Other	Free	Free	kg

7603: Aluminum powders and flakes

Code	Description	General Rate	Column 2 Rate	Special Rate	Units of Quantity
7603.10.00.00	Powders of non-lamellar structure	5%	45%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7603.20.00.00	Powders of lamellar structure; flakes	3.9%	11%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg

7604: Aluminum bars, rods and profiles

Code	Description	General Rate	Column 2 Rate	Special Rate	Units of Quantity
7604.10	Of aluminum, not alloyed
7604.10.10.00	· Profiles	5%	45%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
	· Bars and rods
7604.10.30.00	· · Having a round cross section	2.6%	11%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7604.10.50.00	· · Other	3%	13.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
	Of aluminum alloys
7604.21.00	· Hollow profiles	1.5%	15.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7604.21.00.10	· · Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter	1.5%	15.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7604.21.00.90	· · Other	1.5%	15.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7604.29	· Other
7604.29.10	· · Other profiles	5%	45%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7604.29.10.10	· · · Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter	5%	45%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7604.29.10.90	· · · Other	5%	45%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
	· · Bars and rods
7604.29.30	· · · Having a round cross section	2.6%	11%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7604.29.30.30	· · · · High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter	2.6%	11%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7604.29.30.60	· · · · Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter	2.6%	11%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7604.29.30.90	· · · · Other	2.6%	11%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7604.29.50	· · · Other	3%	13.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7604.29.50.20	· · · · High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter	3%	13.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7604.29.50.50	· · · · Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter	3%	13.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7604.29.50.90	· · · · Other	3%	13.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg

7605: Aluminum wire

Code	Description	General Rate	Column 2 Rate	Special Rate	Units of Quantity
	Of aluminum, not alloyed
7605.11.00.00	· Of which the maximum cross-sectional dimension exceeds 7 mm	2.6%	11%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7605.19.00.00	· Other	4.2%	25%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
	Of aluminum alloys
7605.21.00.00	· Of which the maximum cross-sectional dimension exceeds 7 mm	2.6%	11%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7605.29.00.00	· Other	4.2%	25%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg

7606: Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm

Code	Description	General Rate	Column 2 Rate	Special Rate	Units of Quantity
	Rectangular (including square)
7606.11	· Of aluminum, not alloyed
7606.11.30	· · Not clad	3%	13.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7606.11.30.30	· · · With a thickness of more than 6.3 mm	3%	13.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7606.11.30.60	· · · With a thickness of 6.3 mm or less	3%	13.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7606.11.60.00	· · Clad	2.7%	9.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7606.12	· Of aluminum alloys
7606.12.30	· · Not clad	3%	13.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
	· · · With a thickness of 6.3 mm or less
	· · · · Aluminum can stock
7606.12.30.45	· · · · · Body stock	3%	13.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7606.12.30.55	· · · · · Lid stock	3%	13.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
	· · · · Other
7606.12.30.91	· · · · · Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter	3%	13.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7606.12.30.96	· · · · · Other	3%	13.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
	· · · With a thickness of more than 6.3 mm
7606.12.30.15	· · · · High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter	3%	13.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7606.12.30.25	· · · · Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter	3%	13.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7606.12.30.35	· · · · Other	3%	13.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7606.12.60.00	· · Clad	6.5%	30%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
	Other
7606.91	· Of aluminum, not alloyed
7606.91.30	· · Not clad	3%	13.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7606.91.30.55	· · · With a thickness of more than 6.3 mm	3%	13.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7606.91.30.95	· · · With a thickness of 6.3 mm or less	3%	13.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7606.91.60	· · Clad	2.7%	9.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7606.91.60.55	· · · With a thickness of more than 6.3 mm	2.7%	9.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7606.91.60.95	· · · With a thickness of 6.3 mm or less	2.7%	9.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7606.92	· Of aluminum alloys
7606.92.30	· · Not clad	3%	13.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7606.92.30.25	· · · With a thickness of more than 6.3 mm	3%	13.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7606.92.30.35	· · · With a thickness of 6.3 mm or less	3%	13.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7606.92.60	· · Clad	6.5%	30%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7606.92.60.55	· · · With a thickness of more than 6.3 mm	6.5%	30%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7606.92.60.95	· · · With a thickness of 6.3 mm or less	6.5%	30%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg

7607: Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm

Code	Description	General Rate	Column 2 Rate	Special Rate	Units of Quantity
	Not backed
7607.11	· Rolled but not further worked
	· · Of a thickness not exceeding 0.15 mm
7607.11.30.00	· · · Of a thickness not exceeding 0.01 mm	5.8%	40%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7607.11.60	· · · Of a thickness exceeding 0.01 mm	5.3%	40%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7607.11.60.10	· · · · Boxed aluminum foil weighing not more than 11.3 kg	5.3%	40%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kgm2
7607.11.60.90	· · · · Other	5.3%	40%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kgm2
7607.11.90	· · Other	3%	13.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
	· · · Aluminum can stock
7607.11.90.30	· · · · Body stock	3%	13.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7607.11.90.60	· · · · Lid stock	3%	13.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7607.11.90.90	· · · Other	3%	13.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7607.19	· Other
7607.19.10.00	· · Etched capacitor foil	5.3%	40%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
	· · Other
7607.19.30.00	· · · Cut to shape, of a thickness not exceeding 0.15 mm	5.7%	45%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7607.19.60.00	· · · Other	3%	13.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7607.20	Backed
7607.20.10.00	· Covered or decorated with a character, design, fancy effect or pattern	3.7%	22.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7607.20.50.00	· Other	Free	23%		kg

7608: Aluminum tubes and pipes

Code	Description	General Rate	Column 2 Rate	Special Rate	Units of Quantity
7608.10.00	Of aluminum, not alloyed	5.7%	45%	Free (A, AU, B, BH, C, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7608.10.00.30	· Seamless	5.7%	45%	Free (A, AU, B, BH, C, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7608.10.00.90	· Other	5.7%	45%	Free (A, AU, B, BH, C, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7608.20.00	Of aluminum alloys	5.7%	45%	Free (A, AU, B, BH, C, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7608.20.00.30	· Seamless	5.7%	45%	Free (A, AU, B, BH, C, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7608.20.00.90	· Other	5.7%	45%	Free (A, AU, B, BH, C, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg

7609000000: Aluminum tube or pipe fittings (for example, couplings, elbows, sleeves)

Code	Description	General Rate	Column 2 Rate	Special Rate	Units of Quantity
7609.00.00.00	Aluminum tube or pipe fittings (for example, couplings, elbows, sleeves)	5.7%	45%	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg

7610: Aluminum structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminum plates, rods, profiles, tubes and the like, prepared for use in structures

Code	Description	General Rate	Column 2 Rate	Special Rate	Units of Quantity
7610.10.00	Doors, windows and their frames and thresholds for doors	5.7%	45%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7610.10.00.10	· Windows and their frames	5.7%	45%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7610.10.00.20	· Thresholds for doors	5.7%	45%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7610.10.00.30	· Other	5.7%	45%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7610.90.00	Other	5.7%	45%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7610.90.00.20	· Sheet-metal roofing, siding, flooring, and roof guttering and drainage equipment	5.7%	45%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7610.90.00.40	· Architectural and ornamental work	5.7%	45%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
	· Other
7610.90.00.60	· · Mobile homes	5.7%	45%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7610.90.00.80	· · Other	5.7%	45%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg

76110000: Aluminum reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment

Code	Description	General Rate	Column 2 Rate	Special Rate	Units of Quantity
7611.00.00.30	Tanks	2.6%	45%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	No.
7611.00.00.90	Other	2.6%	45%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	No.

7612: Aluminum casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment

Code	Description	General Rate	Column 2 Rate	Special Rate	Units of Quantity
7612.10.00.00	Collapsible tubular containers	2.4%	45%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	No.
7612.90	Other
7612.90.10	· Of a capacity not exceeding 20 liters	5.7%	45%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7612.90.10.30	· · Cans of a capacity not exceeding 355 ml	5.7%	45%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	No.
7612.90.10.60	· · Cans of a capacity exceeding 355 ml but less than 3.8 liters	5.7%	45%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	No.
7612.90.10.90	· · Other	5.7%	45%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	No.
7612.90.50.00	· Other	Free	25%		No.

7613000000: Aluminum containers for compressed or liquefied gas

Code	Description	General Rate	Column 2 Rate	Special Rate	Units of Quantity
7613.00.00.00	Aluminum containers for compressed or liquefied gas	5%	25%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	No.

7614: Stranded wire, cables, plaited bands and the like, including slings and similar articles, of aluminum, not electrically insulated

Code	Description	General Rate	Column 2 Rate	Special Rate	Units of Quantity
7614.10	With steel core
7614.10.10.00	· Not fitted with fittings and not made up into articles	4.9%	35%	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7614.10.50.00	· Fitted with fittings or made up into articles	4.9%	35%	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7614.90	Other
	· Not fitted with fittings and not made up into articles
7614.90.20	· · Electrical conductors	4.9%	35%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7614.90.20.30	· · · With a cross-sectional area less than 240 mm²	4.9%	35%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7614.90.20.60	· · · With a cross-sectional area greater than or equal to 240 mm²	4.9%	35%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7614.90.40.00	· · Other	4.9%	35%	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7614.90.50.00	· Fitted with fittings or made up into articles	5.7%	45%	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg

7615: Table, kitchen or other household articles and parts thereof, of aluminum; pot scourers and scouring or polishing pads, gloves and the like, of aluminum; sanitary ware and parts thereof, of aluminum

Code	Description	General Rate	Column 2 Rate	Special Rate	Units of Quantity
7615.10	Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like
7615.10.11.00	· Pot scourers and scouring or polishing pads, gloves and the like	3.1%	45.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
	· Other
	· · Cooking and kitchen ware
	· · · Enameled or glazed or containing nonstick interior finishes
7615.10.20	· · · · Cast	3.1%	45.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7615.10.20.15	· · · · · Bakeware (cookware not suitable for stove top use)	3.1%	45.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	No.kg
7615.10.20.25	· · · · · Other	3.1%	45.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	No.kg
7615.10.30	· · · · Other	3.1%	45.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7615.10.30.15	· · · · · Bakeware (cookware not suitable for stove top use)	3.1%	45.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	No.kg
7615.10.30.25	· · · · · Other	3.1%	45.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	No.kg
	· · · Not enameled or glazed and not containing nonstick interior finishes
7615.10.50	· · · · Cast	3.1%	45.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7615.10.50.20	· · · · · Bakeware (cookware not suitable for stove top use)	3.1%	45.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	No.kg
7615.10.50.40	· · · · · Other	3.1%	45.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	No.kg
7615.10.71	· · · · Other	3.1%	45.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7615.10.71.25	· · · · · Containers suitable for food preparation, baking, reheating or storage, 0.04 mm or more but not over 0.22 mm in thickness	3.1%	45.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	No.kg
	· · · · · Other cookware
7615.10.71.30	· · · · · · Bakeware (cookware not suitable for stove top use)	3.1%	45.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	No.kg
7615.10.71.55	· · · · · · Other	3.1%	45.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	No.kg
7615.10.71.80	· · · · · Other	3.1%	45.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	No.kg
7615.10.91.00	· · Other	3.1%	45.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7615.20.00.00	Sanitary ware and parts thereof	3.8%	45.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg

7616: Other articles of aluminum

Code	Description	General Rate	Column 2 Rate	Special Rate	Units of Quantity
7616.10	Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles
7616.10.10.00	· Nails, tacks and staples	5.7%	45%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7616.10.30.00	· Rivets	4.7%	45%	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7616.10.50.00	· Cotters and cotter pins	5.7%	45%	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
	· Other
7616.10.70	· · Having shanks, threads or holes over 6 mm in diameter	5.5%	45%	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG) 2.75% (JP)
7616.10.70.30	· · · Threaded fasteners	5.5%	45%	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG) 2.75% (JP)	kg
7616.10.70.90	· · · Other	5.5%	45%	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG) 2.75% (JP)	kg
7616.10.90	· · Other	6%	45%	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7616.10.90.30	· · · Threaded fasteners	6%	45%	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7616.10.90.90	· · · Other	6%	45%	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
	Other
7616.91.00.00	· Cloth, grill, netting and fencing, of aluminum wire	2.5%	45%	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7616.99	· Other
7616.99.10.00	· · Luggage frames	Free	45%		kg
7616.99.51	· · Other	2.5%	45%	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7616.99.51.20	· · · Laminated goods consisting of 2 or more flat-rolled sheets of aluminum held together with an adhesive or having a core of non-metallic material	2.5%	45%	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7616.99.51.30	· · · Ladders	2.5%	45%	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	No.
7616.99.51.40	· · · Venetian blinds and parts thereof	2.5%	45%	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	No.
7616.99.51.50	· · · Hangers and supports for pipes and tubes	2.5%	45%	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
	· · · Other
7616.99.51.60	· · · · Castings	2.5%	45%	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7616.99.51.70	· · · · Forgings	2.5%	45%	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
	· · · · Other
7616.99.51.75	· · · · · Articles of wire	2.5%	45%	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7616.99.51.90	· · · · · Other	2.5%	45%	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg

Sections

I: Live Animals; Animal Products

II: Vegetable Products

III: Animal or Vegetable Fats and Oils; Prepared Edible Fats; Animal or Vegetable Waxes

IV: Prepared Foodstuffs; Beverages, Spirits, Vinegar; Tobacco

V: Mineral Products

VI: Products of the Chemical or Allied Industries

VII: Plastics and Articles Thereof; Rubber and Articles Thereof

VIII: Raw Hides, Skins, Leather, Furskins, Saddlery and Harness; Travel Goods, Handbags; Articles of Animal Gut

IX: Wood, Wood Charcoal, Cork, Articles of Wood, Basketware

X: Pulp of Wood, Paper or Paperboard, Articles Thereof

XI: Textiles and Textile Articles

XII: Footwear, Headgear, Umbrellas, Feathers, Artificial Flowers; Articles of Human Hair

XIII: Articles of Stone, Plaster, Cement, Asbestos, Ceramic Products, Glass

XIV: Pearls, Precious Stones and Metals, Imitation Jewelry, Coins

XV: Base Metals and Articles of Base Metal

XVI: Machinery, Mechanical Appliances, Electrical Equipment, Sound/TV Recorders and Parts

XVII: Vehicles, Aircraft, Vessels, Transport Equipment

XVIII: Optical, Photographic, Cinematographic, Measuring, Precision Instruments, Clocks, Watches, Musical Instruments

XIX: Arms and Ammunition; Parts and Accessories

XX: Miscellaneous Manufactured Articles

XXI: Works of Art, Collectors' Pieces and Antiques

XXII: Special Classification Provisions, Temporary Legislation, Modifications per Trade Agreements

Chapter 76: Aluminum and articles thereof

7601: Unwrought aluminum

Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils

Other

Of greater than 99.8 percent aluminum

Other

Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils

Containing 25 percent or more by weight of silicon

Other

Aluminum vanadium master alloy

Of uniform circular cross section throughout its length, the foregoing comprised of billets, not in coils

Other, containing 0.03 percent or more by weight of lead (secondary aluminum)

Remelt scrap ingot

Sheet ingot (slab) of a kind described in statistical note 3 to this chapter

Foundry ingot of a kind described in statistical note 4 to this chapter

Other

76020000: Aluminum waste and scrap

Recyclable beverage containers

Recyclable aluminum from industrial processes, including turnings, borings, shavings, filings, clippings and chips

Other recyclable aluminum

Other

7603: Aluminum powders and flakes

Powders of non-lamellar structure

Powders of lamellar structure; flakes

7604: Aluminum bars, rods and profiles

Profiles

Having a round cross section

Other

Hollow profiles

Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter

Other

Other profiles

Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter

Other

Having a round cross section

High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter

Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter

Other

Other

High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter

Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter

Other

7605: Aluminum wire

Of which the maximum cross-sectional dimension exceeds 7 mm

Other

Of which the maximum cross-sectional dimension exceeds 7 mm

Other

7606: Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm

Not clad

With a thickness of more than 6.3 mm

With a thickness of 6.3 mm or less

Clad

Not clad

Body stock

Lid stock

Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter

Other