Chapter 72: Iron and steel

7201: Pig iron and spiegeleisen in pigs, blocks or other primary forms

Code	Description	General Rate	Column 2 Rate	Units of Quantity
7201.10.00.00	Nonalloy pig iron containing by weight 0.5 percent or less of phosphorus	Free	$1.11/t	t
7201.20.00.00	Nonalloy pig iron containing by weight more than 0.5 percent of phosphorus	Free	$1.11/t	t
7201.50	Alloy pig iron; spiegeleisen
7201.50.30.00	· Alloy pig iron	Free	$1.11/t	t
7201.50.60.00	· Spiegeleisen	Free	0.5%	t

7202: Ferroalloys

Code	Description	General Rate	Column 2 Rate	Special Rate	Units of Quantity
	Ferromanganese
7202.11	· Containing by weight more than 2 percent of carbon
7202.11.10.00	· · Containing by weight more than 2 percent but not more than 4 percent of carbon	1.4%	6.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kgMn kg
7202.11.50.00	· · Containing by weight more than 4 percent of carbon	1.5%	10.5%	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kgMn kg
7202.19	· Other
7202.19.10.00	· · Containing by weight not more than 1 percent of carbon	2.3%	22%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kgMn kg
7202.19.50.00	· · Containing by weight more than 1 percent but not more than 2 percent of carbon	1.4%	6.5%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kgMn kg
	Ferrosilicon
7202.21	· Containing by weight more than 55 percent of silicon
	· · Containing by weight more than 55 percent but not more than 80 percent of silicon
7202.21.10.00	· · · Containing by weight more than 3 percent of calcium	1.1%	11.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kgSi kg
7202.21.50.00	· · · Other	1.5%	11.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kgSi kg
7202.21.75.00	· · Containing by weight more than 80 percent but not more than 90 percent of silicon	1.9%	9%	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kgSi kg
7202.21.90.00	· · Containing by weight more than 90 percent of silicon	5.8%	40%	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kgSi kg
7202.29.00	· Other	Free	4.4¢/kg on silicon content
7202.29.00.10	· · Containing by weight over 2 percent of magnesium	Free	4.4¢/kg on silicon content		kgSi kg
7202.29.00.50	· · Other	Free	4.4¢/kg on silicon content		kgSi kg
7202.30.00.00	Ferrosilicon manganese	3.9%	23%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kgMn kg
	Ferrochromium
7202.41.00.00	· Containing by weight more than 4 percent of carbon	1.9%	7.5%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kgCr kg
7202.49	· Other
7202.49.10.00	· · Containing by weight more than 3 percent of carbon	1.9%	7.5%	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kgCr kg
7202.49.50	· · Other	3.1%	30%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7202.49.50.10	· · · Containing by weight more than 0.5 percent of carbon	3.1%	30%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kgCr kg
7202.49.50.90	· · · Other	3.1%	30%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kgCr kg
7202.50.00.00	Ferrosilicon chromium	10%	25%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kgCr kg
7202.60.00.00	Ferronickel	Free	6.6¢/kg		kgNi kg
7202.70.00.00	Ferromolybdenum	4.5%	31.5%	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kgMo kg
7202.80.00.00	Ferrotungsten and ferrosilicon tungsten	5.6%	35%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kgW kg
	Other
7202.91.00.00	· Ferrotitanium and ferrosilicon titanium	3.7%	25%	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7202.92.00.00	· Ferrovanadium	4.2%	25%	Free (A+, AU, BH, CL, CO, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kgV kg
7202.93	· Ferroniobium
7202.93.40.00	· · Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon	5%	25%	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7202.93.80.00	· · Other	5%	25%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7202.99	· Other
7202.99.10.00	· · Ferrozirconium	4.2%	25%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7202.99.20.00	· · Calcium silicon	5%	25%	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7202.99.80	· · Other	5%	25%	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)
7202.99.80.20	· · · Ferrophosphorus	5%	25%	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg
7202.99.80.40	· · · Other	5%	25%	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	kg

7203: Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 percent, in lumps, pellets or similar forms

Code	Description	General Rate	Column 2 Rate	Special Rate	Units of Quantity
7203.10.00.00	Ferrous products obtained by direct reduction of iron ore	Free	$2.21/t		t
7203.90.00.00	Other	Free	$2.21/t		t

7204: Ferrous waste and scrap; remelting scrap ingots of iron or steel

Code	Description	General Rate	Column 2 Rate	Units of Quantity
7204.10.00.00	Waste and scrap of cast iron	Free	74¢/t	t
	Waste and scrap of alloy steel
7204.21.00.00	· Of stainless steel	Free	74¢/t	t
7204.29.00.00	· Other	Free	74¢/t	t
7204.30.00.00	Waste and scrap of tinned iron or steel	Free	Free	t
	Other waste and scrap
7204.41.00	· Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles	Free	74¢/t
7204.41.00.20	· · No. 1 bundles	Free	74¢/t	t
7204.41.00.40	· · No. 2 bundles	Free	74¢/t	t
7204.41.00.60	· · Borings, shovelings and turnings	Free	74¢/t	t
7204.41.00.80	· · Other	Free	74¢/t	t
7204.49.00	· Other	Free	74¢/t
7204.49.00.20	· · No. 1 heavy melting	Free	74¢/t	t
7204.49.00.40	· · No. 2 heavy melting	Free	74¢/t	t
	· · Other
7204.49.00.60	· · · Cut plate and structural	Free	74¢/t	t
7204.49.00.70	· · · Shredded	Free	74¢/t	t
7204.49.00.80	· · · Other	Free	74¢/t	t
7204.50.00.00	Remelting scrap ingots	Free	74¢/t	t

7205: Granules and powders, of pig iron, spiegeleisen, iron or steel

Code	Description	General Rate	Column 2 Rate	Units of Quantity
7205.10.00.00	Granules	Free	3%	kg
	Powders
7205.21.00.00	· Of alloy steel	Free	45%	kg
7205.29.00.00	· Other	Free	$2.21/t	t

7206: Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203)

Code	Description	General Rate	Column 2 Rate	Special Rate	Units of Quantity
7206.10.00.00	Ingots	Free	20%		kg
7206.90.00.00	Other	Free	20%		kg

7207: Semifinished products of iron or nonalloy steel

Code	Description	General Rate	Column 2 Rate	Units of Quantity
	Containing by weight less than 0.25 percent of carbon
7207.11.00.00	· Of rectangular (including square) cross section, the width measuring less than twice the thickness	Free	20%	kg
7207.12.00	· Other, of rectangular (other than square) cross section	Free	20%
7207.12.00.10	· · Having a width measuring less than four times the thickness	Free	20%	kg
7207.12.00.50	· · Having a width measuring at least four times the thickness	Free	20%	kg
7207.19.00	· Other	Free	20%
7207.19.00.30	· · Of circular cross section	Free	20%	kg
7207.19.00.90	· · Other	Free	20%	kg
7207.20.00	Containing by weight 0.25 percent or more of carbon	Free	20%
	· Of rectangular (including square) cross section
7207.20.00.25	· · Having a width measuring less than four times the thickness	Free	20%	kg
7207.20.00.45	· · Having a width measuring at least four times the thickness	Free	20%	kg
7207.20.00.75	· Of circular cross section	Free	20%	kg
7207.20.00.90	· Other	Free	20%	kg

7208: Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated

Code	Description	General Rate	Column 2 Rate	Units of Quantity
7208.10	In coils, not further worked than hot-rolled, with patterns in relief
7208.10.15.00	· Pickled	Free	0.4¢/kg + 20%	kg
	· Other
7208.10.30.00	· · Of a thickness of 4.75 mm or more	Free	20%	kg
7208.10.60.00	· · Of a thickness of less than 4.75 mm	Free	20%	kg
	Other, in coils, not further worked than hot-rolled, pickled
7208.25	· Of a thickness of 4.75 mm or more
7208.25.30.00	· · Of high-strength steel	Free	20%	kg
7208.25.60.00	· · Other	Free	0.4¢/kg + 20%	kg
7208.26.00	· Of a thickness of 3 mm or more but less than 4.75 mm	Free	0.4¢/kg + 20%
7208.26.00.30	· · High-strength steel	Free	0.4¢/kg + 20%	kg
7208.26.00.60	· · Other	Free	0.4¢/kg + 20%	kg
7208.27.00	· Of a thickness of less than 3 mm	Free	0.4¢/kg + 20%
	· · High-strength steel
7208.27.00.40	· · · “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter	Free	0.4¢/kg + 20%	kg
7208.27.00.45	· · · Other	Free	0.4¢/kg + 20%	kg
7208.27.00.60	· · Other	Free	0.4¢/kg + 20%	kg
	Other, in coils, not further worked than hot-rolled
7208.36.00	· Of a thickness exceeding 10 mm	Free	20%
7208.36.00.30	· · High-strength steel	Free	20%	kg
7208.36.00.60	· · Other	Free	20%	kg
7208.37.00	· Of a thickness of 4.75 mm or more but not exceeding 10 mm	Free	20%
7208.37.00.30	· · High-strength steel	Free	20%	kg
7208.37.00.60	· · Other	Free	20%	kg
7208.38.00	· Of a thickness of 3 mm or more but less than 4.75 mm	Free	20%
7208.38.00.15	· · High-strength steel	Free	20%	kg
	· · Other
7208.38.00.30	· · · With untrimmed edges	Free	20%	kg
7208.38.00.90	· · · Other	Free	20%	kg
7208.39.00	· Of a thickness of less than 3 mm	Free	20%
	· · High-strength steel
7208.39.00.20	· · · “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter	Free	20%	kg
7208.39.00.25	· · · Other	Free	20%	kg
	· · Other
7208.39.00.30	· · · With untrimmed edges	Free	20%	kg
7208.39.00.90	· · · Other	Free	20%	kg
7208.40	Not in coils, not further worked than hot-rolled, with patterns in relief
7208.40.30	· Of a thickness of 4.75 mm or more	Free	20%
7208.40.30.30	· · Of a thickness exceeding 10 mm	Free	20%	kg
7208.40.30.60	· · Other	Free	20%	kg
7208.40.60	· Of a thickness of less than 4.75 mm	Free	20%
7208.40.60.30	· · Of a thickness less than 3 mm	Free	20%	kg
7208.40.60.60	· · Other	Free	20%	kg
	Other, not in coils, not further worked than hot-rolled
7208.51.00	· Of a thickness exceeding 10 mm	Free	20%
7208.51.00.30	· · Universal mill plate	Free	20%	kg
	· · Other
7208.51.00.45	· · · Of high-strength steel	Free	20%	kg
7208.51.00.60	· · · Other	Free	20%	kg
7208.52.00.00	· Of a thickness of 4.75 mm or more but not exceeding 10 mm	Free	20%	kg
7208.53.00.00	· Of a thickness of 3 mm or more but less than 4.75 mm	Free	20%	kg
7208.54.00.00	· Of a thickness of less than 3 mm	Free	20%	kg
7208.90.00.00	Other	Free	20%	kg

7209: Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated

Code	Description	General Rate	Column 2 Rate	Units of Quantity
	In coils, not further worked than cold-rolled (cold-reduced)
7209.15.00.00	· Of a thickness of 3 mm or more	Free	0.4¢/kg + 20%	kg
7209.16.00	· Of a thickness exceeding 1 mm but less than 3 mm	Free	0.4¢/kg + 20%
	· · Of high-strength steel
	· · · Annealed
7209.16.00.40	· · · · “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter	Free	0.4¢/kg + 20%	kg
7209.16.00.45	· · · · Other	Free	0.4¢/kg + 20%	kg
7209.16.00.60	· · · Other	Free	0.4¢/kg + 20%	kg
	· · Other
7209.16.00.70	· · · Annealed	Free	0.4¢/kg + 20%	kg
7209.16.00.91	· · · Other	Free	0.4¢/kg + 20%	kg
7209.17.00	· Of a thickness of 0.5 mm or more but not exceeding 1 mm	Free	0.4¢/kg + 20%
	· · Of high-strength steel
	· · · Annealed
7209.17.00.40	· · · · “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter	Free	0.4¢/kg + 20%	kg
7209.17.00.45	· · · · Other	Free	0.4¢/kg + 20%	kg
7209.17.00.60	· · · Other	Free	0.4¢/kg + 20%	kg
	· · Other
7209.17.00.70	· · · Annealed	Free	0.4¢/kg + 20%	kg
7209.17.00.91	· · · Other	Free	0.4¢/kg + 20%	kg
7209.18	· Of a thickness of less than 0.5 mm
7209.18.15	· · Of high-strength steel	Free	0.4¢/kg + 20%
7209.18.15.30	· · · Annealed	Free	0.4¢/kg + 20%	kg
7209.18.15.60	· · · Other	Free	0.4¢/kg + 20%	kg
	· · Other
7209.18.25	· · · Of a thickness of less than 0.361 mm (blackplate)	Free	20%
7209.18.25.20	· · · · Annealed	Free	20%	kg
7209.18.25.85	· · · · Other	Free	20%	kg
7209.18.60	· · · Other	Free	0.4¢/kg + 20%
7209.18.60.20	· · · · Annealed	Free	0.4¢/kg + 20%	kg
7209.18.60.90	· · · · Other	Free	0.4¢/kg + 20%	kg
	Not in coils, not further worked than cold-rolled (cold-reduced)
7209.25.00.00	· Of a thickness of 3 mm or more	Free	0.4¢/kg + 20%	kg
7209.26.00.00	· Of a thickness exceeding 1 mm but less than 3 mm	Free	0.4¢/kg + 20%	kg
7209.27.00.00	· Of a thickness of 0.5 mm or more but not exceeding 1 mm	Free	0.4¢/kg + 20%	kg
7209.28.00.00	· Of a thickness of less than 0.5 mm	Free	0.4¢/kg + 20%	kg
7209.90.00.00	Other	Free	0.4¢/kg + 20%	kg

7210: Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated

Code	Description	General Rate	Column 2 Rate	Units of Quantity
	Plated or coated with tin
7210.11.00.00	· Of a thickness of 0.5 mm or more	Free	6%	kg
7210.12.00.00	· Of a thickness of less than 0.5 mm	Free	6%	kg
7210.20.00.00	Plated or coated with lead, including terne-plate	Free	6%	kg
7210.30.00	Electrolytically plated or coated with zinc	Free	21.5%
7210.30.00.30	· Of high-strength steel	Free	21.5%	kg
7210.30.00.60	· Other	Free	21.5%	kg
	Otherwise plated or coated with zinc
7210.41.00.00	· Corrugated	Free	21.5%	kg
7210.49.00	· Other	Free	21.5%
	· · Of high-strength steel
7210.49.00.40	· · · “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter	Free	21.5%	kg
7210.49.00.45	· · · Other	Free	21.5%	kg
	· · Other
7210.49.00.91	· · · Of a thickness of 0.4 mm or more	Free	21.5%	kg
7210.49.00.95	· · · Other	Free	21.5%	kg
7210.50.00	Plated or coated with chromium oxides or with chromium and chromium oxides	Free	45%
7210.50.00.20	· Of a width less than 1050 mm	Free	45%	kg
7210.50.00.90	· Other	Free	45%	kg
	Plated or coated with aluminum
7210.61.00.00	· Plated or coated with aluminum-zinc alloys	Free	21.5%	kg
7210.69.00.00	· Other	Free	21.5%	kg
7210.70	Painted, varnished or coated with plastics
7210.70.30.00	· Not coated or plated with metal and not clad	Free	0.4¢/kg + 20%	kg
7210.70.60	· Other	Free	21.5%
	· · Zinc coated or plated
7210.70.60.30	· · · Electrolytically coated or plated	Free	21.5%	kg
7210.70.60.60	· · · Other	Free	21.5%	kg
7210.70.60.90	· · Other	Free	21.5%	kg
7210.90	Other
7210.90.10.00	· Clad	Free	30%	kg
	· Other
7210.90.60.00	· · Electrolytically coated or plated with base metal	Free	45%	kg
7210.90.90.00	· · Other	Free	21.5%	kg

7211: Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated

Code	Description	General Rate	Column 2 Rate	Units of Quantity
	Not further worked than hot-rolled
7211.13.00.00	· Universal mill plate	Free	20%	kg
7211.14.00	· Other, of a thickness of 4.75 mm or more	Free	20%
7211.14.00.30	· · Of high-strength steel	Free	20%	kg
	· · Other
7211.14.00.45	· · · Not in coils	Free	20%	kg
7211.14.00.90	· · · Other	Free	20%	kg
7211.19	· Other
	· · Of a width of less than 300 mm
7211.19.15.00	· · · Of high-strength steel	Free	25%	kg
	· · · Other
7211.19.20.00	· · · · Of a thickness exceeding 1.25 mm	Free	25%	kg
7211.19.30.00	· · · · Other	Free	25%	kg
	· · Other
7211.19.45.00	· · · Of high-strength steel	Free	20%	kg
	· · · Other
7211.19.60.00	· · · · Pickled	Free	0.4¢/kg + 20%	kg
7211.19.75	· · · · Other	Free	20%
	· · · · · In coils
7211.19.75.30	· · · · · · With untrimmed edges	Free	20%	kg
7211.19.75.60	· · · · · · Other	Free	20%	kg
7211.19.75.90	· · · · · Other	Free	20%	kg
	Not further worked than cold-rolled (cold-reduced)
7211.23	· Containing by weight less than 0.25 percent of carbon
	· · Of a width of less than 300 mm
	· · · Of a thickness exceeding 1.25 mm
7211.23.15.00	· · · · Of high-strength steel	Free	25%	kg
7211.23.20.00	· · · · Other	Free	25%	kg
7211.23.30.00	· · · Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm	Free	25%	kg
7211.23.45.00	· · · Of a thickness not exceeding 0.25 mm	Free	25%	kg
7211.23.60	· · Other	Free	0.4¢/kg + 20%
7211.23.60.30	· · · Of a thickness exceeding 1.25 mm	Free	0.4¢/kg + 20%	kg
7211.23.60.60	· · · Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm	Free	0.4¢/kg + 20%	kg
7211.23.60.90	· · · Of a thickness not exceeding 0.25 mm	Free	0.4¢/kg + 20%	kg
7211.29	· Other
	· · Of a width of less than 300 mm
7211.29.20	· · · Of a thickness exceeding 0.25 mm	Free	25%
7211.29.20.30	· · · · Of a width less than 51 mm, in coils	Free	25%	kg
7211.29.20.90	· · · · Other	Free	25%	kg
7211.29.45.00	· · · Other	Free	25%	kg
7211.29.60	· · Other	Free	0.4¢/kg + 20%
7211.29.60.30	· · · Of a thickness exceeding 1.25 mm	Free	0.4¢/kg + 20%	kg
7211.29.60.80	· · · Other	Free	0.4¢/kg + 20%	kg
7211.90.00.00	Other	Free	20%	kg

7212: Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated

Code	Description	General Rate	Column 2 Rate	Units of Quantity
7212.10.00.00	Plated or coated with tin	Free	6%	kg
7212.20.00.00	Electrolytically plated or coated with zinc	Free	21.5%	kg
7212.30	Otherwise plated or coated with zinc
	· Of a width of less than 300 mm
7212.30.10	· · Of a thickness exceeding 0.25 mm or more	Free	25%
7212.30.10.30	· · · Of a width less than 51 mm, in coils	Free	25%	kg
7212.30.10.90	· · · Other	Free	25%	kg
7212.30.30.00	· · Other	Free	25%	kg
7212.30.50.00	· Other	Free	21.5%	kg
7212.40	Painted, varnished or coated with plastics
7212.40.10.00	· Of a width of less than 300 mm	Free	25%	kg
7212.40.50.00	· Other	Free	0.4¢/kg + 20%	kg
7212.50.00.00	Otherwise plated or coated	Free	21.5%	kg
7212.60.00.00	Clad	Free	30%	kg

7213: Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel

Code	Description	General Rate	Column 2 Rate	Units of Quantity
7213.10.00.00	Concrete reinforcing bars and rods	Free	20%	kg
7213.20.00	Other, of free-cutting steel	Free	5.5%
7213.20.00.10	· Containing by weight 0.1 percent or more of lead	Free	5.5%	kg
7213.20.00.80	· Other	Free	5.5%	kg
	Other
7213.91	· Of circular cross section measuring less than 14 mm in diameter
7213.91.30	· · Not tempered, not treated and not partly manufactured	Free	5.5%
7213.91.30.11	· · · Tire cord-quality steel wire rod of a kind described in statistical note 5 to this chapter	Free	5.5%	kg
7213.91.30.15	· · · Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter	Free	5.5%	kg
7213.91.30.20	· · · Of welding quality wire rods of a kind described in statistical note 7 to this chapter	Free	5.5%	kg
7213.91.30.93	· · · Other	Free	5.5%	kg
	· · Other
7213.91.45.00	· · · Containing by weight 0.6 percent or more of carbon	Free	5.5%	kg
7213.91.60.00	· · · Other	Free	6%	kg
7213.99.00	· Other	Free	5.5%
	· · Of circular cross section
7213.99.00.30	· · · With a diameter of 14 mm or more but less than 19 mm	Free	5.5%	kg
7213.99.00.60	· · · With a diameter of 19 mm or more	Free	5.5%	kg
7213.99.00.90	· · Other	Free	5.5%	kg

7214: Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling

Code	Description	General Rate	Column 2 Rate	Units of Quantity
7214.10.00.00	Forged	Free	20%	kg
7214.20.00.00	Concrete reinforcing bars and rods	Free	20%	kg
7214.30.00	Other, of free-cutting steel	Free	20%
7214.30.00.10	· Containing by weight 0.1 percent or more of lead	Free	20%	kg
7214.30.00.80	· Other	Free	20%	kg
	Other
7214.91.00	· Of rectangular (other than square) cross-section	Free	20%
	· · Containing by weight less than 0.25 percent of carbon
7214.91.00.16	· · · With a maximum cross section less than 152 mm	Free	20%	kg
7214.91.00.20	· · · With a maximum cross section of 152 mm or more	Free	20%	kg
7214.91.00.60	· · Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	Free	20%	kg
7214.91.00.90	· · Containing by weight 0.6 percent or more of carbon	Free	20%	kg
7214.99.00	· Other	Free	20%
	· · Rounds
	· · · Containing by weight less than 0.25 percent of carbon
7214.99.00.16	· · · · With a diameter less than 76 mm	Free	20%	kg
7214.99.00.21	· · · · With a diameter of 76 mm or more but not exceeding 152 mm	Free	20%	kg
7214.99.00.26	· · · · With a diameter exceeding 152 mm	Free	20%	kg
	· · · Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
7214.99.00.31	· · · · With a diameter less than 76 mm	Free	20%	kg
7214.99.00.36	· · · · With a diameter of 76 mm or more but not exceeding 152 mm	Free	20%	kg
7214.99.00.40	· · · · With a diameter exceeding 152 mm	Free	20%	kg
7214.99.00.45	· · · Containing by weight 0.6 percent or more of carbon	Free	20%	kg
	· · Other
7214.99.00.60	· · · Containing by weight less than 0.25 percent of carbon	Free	20%	kg
7214.99.00.75	· · · Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	Free	20%	kg
7214.99.00.90	· · · Containing by weight 0.6 percent or more of carbon	Free	20%	kg

7215: Other bars and rods of iron or nonalloy steel

Code	Description	General Rate	Column 2 Rate	Units of Quantity
7215.10.00	Of free-cutting steel, not further worked than cold-formed or cold-finished	Free	0.3¢/kg + 20%
7215.10.00.10	· Containing by weight 0.1 percent or more of lead	Free	0.3¢/kg + 20%	kg
7215.10.00.80	· Other	Free	0.3¢/kg + 20%	kg
7215.50.00	Other, not further worked than cold-formed or cold-finished	Free	0.3¢/kg + 20%
	· Containing by weight less than 0.25 percent of carbon
7215.50.00.16	· · With a diameter or cross section measuring less than 76 mm	Free	0.3¢/kg + 20%	kg
7215.50.00.18	· · With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm	Free	0.3¢/kg + 20%	kg
7215.50.00.20	· · With a diameter or cross section exceeding 228 mm	Free	0.3¢/kg + 20%	kg
	· Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
7215.50.00.61	· · With a diameter or cross section measuring less than 76 mm	Free	0.3¢/kg + 20%	kg
7215.50.00.63	· · With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm	Free	0.3¢/kg + 20%	kg
7215.50.00.65	· · With a diameter or cross section exceeding 228 mm	Free	0.3¢/kg + 20%	kg
7215.50.00.90	· Containing by weight 0.6 percent or more of carbon	Free	0.3¢/kg + 20%	kg
7215.90	Other
	· Plated or coated with metal
7215.90.10.00	· · Not cold-formed	Free	0.4¢/kg + 20%	kg
7215.90.30.00	· · Cold-formed	Free	0.3¢/kg + 20%	kg
7215.90.50.00	· Other	Free	0.3¢/kg + 20%	kg

7216: Angles, shapes and sections of iron or nonalloy steel

Code	Description	General Rate	Column 2 Rate	Units of Quantity
7216.10.00	U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm	Free	2%
7216.10.00.10	· U sections	Free	2%	kg
7216.10.00.50	· Other	Free	2%	kg
	L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216.21.00.00	· L sections	Free	2%	kg
7216.22.00.00	· T sections	Free	2%	kg
	U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216.31.00.00	· U sections	Free	2%	kg
7216.32.00.00	· I sections (standard beams)	Free	2%	kg
7216.33.00	· H sections	Free	2%
7216.33.00.30	· · Weighing not more than 11.3 kg per 30.5 cm, with a web depth measuring 102 mm to 356 mm	Free	2%	kg
7216.33.00.60	· · Weighing more than 11.3 kg but not more than 27.2 kg per 30.5 cm, with a web depth measuring 203 mm to 457 mm	Free	2%	kg
7216.33.00.90	· · Other	Free	2%	kg
7216.40.00	L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more	Free	2%
7216.40.00.10	· L sections	Free	2%	kg
7216.40.00.50	· Other	Free	2%	kg
7216.50.00.00	Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded	Free	2%	kg
	Angles, shapes and sections, not further worked than cold-formed or cold-finished
7216.61.00.00	· Obtained from flat-rolled products	Free	20%	kg
7216.69.00.00	· Other	Free	20%	kg
	Other
7216.91.00	· Cold-formed or cold-finished from flat-rolled products	Free	20%
7216.91.00.10	· · Drilled, notched, punched or cambered	Free	20%	kg
7216.91.00.90	· · Other	Free	20%	kg
7216.99.00	· Other	Free	20%
7216.99.00.10	· · Drilled, notched, punched or cambered	Free	20%	kg
7216.99.00.90	· · Other	Free	20%	kg

7217: Wire of iron or nonalloy steel

Code	Description	General Rate	Column 2 Rate	Units of Quantity
7217.10	Not plated or coated, whether or not polished
	· Containing by weight less than 0.25 percent of carbon
	· · Flat wire
7217.10.10.00	· · · Of a thickness not exceeding 0.25 mm	Free	25%	kg
7217.10.20.00	· · · Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm	Free	25%	kg
7217.10.30.00	· · · Of a thickness exceeding 1.25 mm	Free	25%	kg
	· · Round wire
7217.10.40	· · · With a diameter of less than 1.5 mm	Free	25%
	· · · · Heat treated
7217.10.40.40	· · · · · In coils weighing not more than 2 kilograms	Free	25%	kg
7217.10.40.45	· · · · · Other	Free	25%	kg
7217.10.40.90	· · · · Other	Free	25%	kg
7217.10.50	· · · With a diameter of 1.5 mm or more	Free	7%
7217.10.50.30	· · · · Heat treated	Free	7%	kg
7217.10.50.90	· · · · Other	Free	7%	kg
7217.10.60.00	· · Other wire	Free	25%	kg
	· Other
7217.10.70.00	· · Flat wire	Free	25%	kg
7217.10.80	· · Round wire	Free	25%
	· · · Containing by weight 0.6 percent or more of carbon
	· · · · Heat treated
7217.10.80.25	· · · · · With a diameter of less than 1.0 mm	Free	25%	kg
7217.10.80.30	· · · · · With a diameter of 1.0 mm or more but less than 1.5 mm	Free	25%	kg
7217.10.80.45	· · · · · With a diameter of 1.5 mm or more	Free	25%	kg
	· · · · Other
7217.10.80.60	· · · · · With a diameter of less than 1.0 mm	Free	25%	kg
7217.10.80.75	· · · · · With a diameter of 1.0 mm or more but less than 1.5 mm	Free	25%	kg
7217.10.80.90	· · · · · With a diameter of 1.5 mm or more	Free	25%	kg
	· · · Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
7217.10.80.10	· · · · Heat treated	Free	25%	kg
7217.10.80.20	· · · · Other	Free	25%	kg
7217.10.90.00	· · Other wire	Free	25%	kg
7217.20	Plated or coated with zinc
7217.20.15.00	· Flat wire	Free	26%	kg
	· Round wire
7217.20.30.00	· · With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon	Free	7%	kg
7217.20.45	· · Other	Free	25%
	· · · With a diameter of less than 1.0 mm
7217.20.45.10	· · · · Containing by weight less than 0.25 percent of carbon	Free	25%	kg
7217.20.45.20	· · · · Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	Free	25%	kg
7217.20.45.30	· · · · Containing by weight 0.6 percent or more of carbon	Free	25%	kg
	· · · With a diameter of 1.0 mm or more but less than 1.5 mm
7217.20.45.40	· · · · Containing by weight less than 0.25 percent of carbon	Free	25%	kg
7217.20.45.50	· · · · Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	Free	25%	kg
7217.20.45.60	· · · · Containing by weight 0.6 percent or more of carbon	Free	25%	kg
	· · · With a diameter of 1.5 mm or more
7217.20.45.70	· · · · Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	Free	25%	kg
7217.20.45.80	· · · · Containing by weight 0.6 percent or more of carbon	Free	25%	kg
	· Other
7217.20.60.00	· · Containing by weight less than 0.25 percent of carbon	Free	25%	kg
7217.20.75.00	· · Other	Free	26%	kg
7217.30	Plated or coated with other base metals
7217.30.15	· Flat wire	Free	26%
7217.30.15.30	· · Containing by weight 0.6 percent or more of carbon	Free	26%	kg
7217.30.15.60	· · Other	Free	26%	kg
	· Round wire
7217.30.30.00	· · With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon	Free	7%	kg
7217.30.45	· · Other	Free	25%
7217.30.45.04	· · · Containing by weight less than 0.20 percent of carbon, and suitable for electric arc welding	Free	25%	kg
	· · · Other
	· · · · With a diameter of less than 1.0 mm
7217.30.45.11	· · · · · Containing by weight less than 0.25 percent of carbon	Free	25%	kg
7217.30.45.20	· · · · · Containing by weight 0.25 percent or more but less than 0.6 percent or carbon	Free	25%	kg
7217.30.45.30	· · · · · Containing by weight 0.6 percent or more of carbon	Free	25%	kg
	· · · · With a diameter of 1.0 mm or more but less than 1.5 mm
7217.30.45.41	· · · · · Containing by weight less than 0.25 percent of carbon	Free	25%	kg
7217.30.45.50	· · · · · Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	Free	25%	kg
7217.30.45.60	· · · · · Containing by weight 0.6 percent or more of carbon	Free	25%	kg
7217.30.45.90	· · · · With a diameter of 1.5 mm or more	Free	25%	kg
	· Other
7217.30.60.00	· · Containing by weight less than 0.25 percent of carbon	Free	25%	kg
7217.30.75.00	· · Other	Free	26%	kg
7217.90	Other
7217.90.10.00	· Coated with plastics	Free	2%	kg
7217.90.50	· Other	Free	35%
7217.90.50.30	· · Containing by weight less than 0.25 percent of carbon	Free	35%	kg
7217.90.50.60	· · Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	Free	35%	kg
7217.90.50.90	· · Containing by weight 0.6 percent or more of carbon	Free	35%	kg

7218: Stainless steel in ingots or other primary forms; semi-finished products of stainless steel

Code	Description	General Rate	Column 2 Rate	Units of Quantity
7218.10.00.00	Ingots and other primary forms	Free	29%	kg
	Other
7218.91.00	· Of rectangular (other than square) cross-section	Free	29%
	· · Having a width less than four times the thickness
7218.91.00.15	· · · Having a cross-sectional area of less than 232 cm2	Free	29%	kg
7218.91.00.30	· · · Having a cross-sectional area of 232 cm2 or more	Free	29%	kg
7218.91.00.60	· · Having a width at least four times the thickness	Free	29%	kg
7218.99.00	· Other	Free	29%
	· · Of square cross section
7218.99.00.15	· · · Having a cross-sectional area of less than 232 cm2	Free	29%	kg
7218.99.00.30	· · · Having a cross-sectional area of 232 cm2 or more	Free	29%	kg
	· · Of circular cross section
7218.99.00.45	· · · Having a cross-sectional area of less than 232 cm2	Free	29%	kg
7218.99.00.60	· · · Having a cross-sectional area of 232 cm2 or more	Free	29%	kg
7218.99.00.90	· · Other	Free	29%	kg

7219: Flat-rolled products of stainless steel, of a width of 600 mm or more

Code	Description	General Rate	Column 2 Rate	Units of Quantity
	Not further worked than hot-rolled, in coils
7219.11.00	· Of a thickness exceeding 10 mm	Free	29%
7219.11.00.30	· · Of a width not exceeding 1575 mm	Free	29%	kg
7219.11.00.60	· · Of a width exceeding 1575 mm	Free	29%	kg
7219.12.00	· Of a thickness of 4.75 mm or more but not exceeding 10 mm	Free	29%
7219.12.00.02	· · Not annealed or not pickled	Free	29%	kg
	· · Other
	· · · Other
	· · · · Of a width of 1370 mm or more
	· · · · · Of a thickness exceeding 6.8 mm
7219.12.00.21	· · · · · · Of a width not exceeding 1575 mm	Free	29%	kg
7219.12.00.26	· · · · · · Of a width exceeding 1575 mm	Free	29%	kg
	· · · · · Other
7219.12.00.51	· · · · · · Of a width not exceeding 1575 mm	Free	29%	kg
7219.12.00.56	· · · · · · Of a width exceeding 1575 mm	Free	29%	kg
	· · · · Other
	· · · · · Containing more than 0.5 percent by weight of nickel
7219.12.00.66	· · · · · · Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	Free	29%	kg
7219.12.00.71	· · · · · · Other	Free	29%	kg
7219.12.00.81	· · · · · Other	Free	29%	kg
7219.12.00.06	· · · Of high-nickel alloy steel	Free	29%	kg
7219.13.00	· Of a thickness of 3 mm or more but less than 4.75 mm	Free	29%
7219.13.00.02	· · Not annealed or not pickled	Free	29%	kg
	· · Other
7219.13.00.31	· · · Of a width of 1370 mm or more	Free	29%	kg
	· · · Other
	· · · · Containing more than 0.5 percent but less than 24 percent by weight of nickel
7219.13.00.51	· · · · · Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	Free	29%	kg
7219.13.00.71	· · · · · Other	Free	29%	kg
7219.13.00.81	· · · · Other	Free	29%	kg
7219.14.00	· Of a thickness of less than 3 mm	Free	29%
7219.14.00.30	· · Of a width of 1370 mm or more	Free	29%	kg
	· · Other
7219.14.00.65	· · · Of high-nickel alloy steel	Free	29%	kg
7219.14.00.90	· · · Other	Free	29%	kg
	Not further worked than hot-rolled, not in coils
7219.21.00	· Of a thickness exceeding 10 mm	Free	29%
7219.21.00.05	· · Of high-nickel alloy steel	Free	29%	kg
	· · Other
7219.21.00.20	· · · Of a width not exceeding 1575 mm	Free	29%	kg
7219.21.00.40	· · · Of a width exceeding 1575 mm but not exceeding 1880 mm	Free	29%	kg
7219.21.00.60	· · · Of a width exceeding 1880 mm	Free	29%	kg
7219.22.00	· Of a thickness of 4.75 mm or more but not exceeding 10 mm	Free	29%
	· · Other
	· · · Containing more than 0.5 percent by weight of nickel
	· · · · Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
7219.22.00.15	· · · · · Of a width not exceeding 1575 mm	Free	29%	kg
7219.22.00.20	· · · · · Of a width exceeding 1575 mm but not exceeding 1880 mm	Free	29%	kg
7219.22.00.25	· · · · · Of a width exceeding 1880 mm	Free	29%	kg
	· · · · Other
7219.22.00.35	· · · · · Of a width not exceeding 1575 mm	Free	29%	kg
7219.22.00.40	· · · · · Of a width exceeding 1575 mm but not exceeding 1880 mm	Free	29%	kg
7219.22.00.45	· · · · · Of a width exceeding 1880 mm	Free	29%	kg
	· · · Other
7219.22.00.70	· · · · Of a width not exceeding 1575 mm	Free	29%	kg
7219.22.00.75	· · · · Of a width exceeding 1575 mm but not exceeding 1880 mm	Free	29%	kg
7219.22.00.80	· · · · Of a width exceeding 1880 mm	Free	29%	kg
7219.22.00.05	· · Of high-nickel alloy steel	Free	29%	kg
7219.23.00	· Of a thickness of 3 mm or more but less than 4.75 mm	Free	29%
7219.23.00.30	· · Of a width of 1370 mm or more	Free	29%	kg
7219.23.00.60	· · Other	Free	29%	kg
7219.24.00	· Of a thickness of less than 3 mm	Free	29%
7219.24.00.30	· · Of a width of 1370 mm or more	Free	29%	kg
7219.24.00.60	· · Other	Free	29%	kg
	Not further worked than cold-rolled (cold-reduced)
7219.31.00	· Of a thickness of 4.75 mm or more	Free	29%
7219.31.00.10	· · In coils	Free	29%	kg
7219.31.00.50	· · Not in coils	Free	29%	kg
7219.32.00	· Of a thickness of 3 mm or more but less than 4.75 mm	Free	29%
	· · In coils
	· · · Of a width of 1370 mm or more
7219.32.00.05	· · · · Of high-nickel alloy steel	Free	29%	kg
	· · · · Other
7219.32.00.20	· · · · · Containing more than 0.5 percent by weight of nickel	Free	29%	kg
7219.32.00.25	· · · · · Other	Free	29%	kg
	· · · Other
	· · · · Other
	· · · · · Containing more than 0.5 percent by weight of nickel
7219.32.00.36	· · · · · · Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	Free	29%	kg
7219.32.00.38	· · · · · · Other	Free	29%	kg
	· · · · · Other
7219.32.00.42	· · · · · · Containing less than 15 percent by weight of chromium	Free	29%	kg
7219.32.00.44	· · · · · · Other	Free	29%	kg
7219.32.00.35	· · · · Of high-nickel alloy steel	Free	29%	kg
	· · Not in coils
7219.32.00.45	· · · Of a width of 1370 mm or more	Free	29%	kg
7219.32.00.60	· · · Other	Free	29%	kg
7219.33.00	· Of a thickness exceeding 1 mm but less than 3 mm	Free	29%
	· · In coils
	· · · Of a width of 1370 mm or more
7219.33.00.05	· · · · Of high-nickel alloy steel	Free	29%	kg
	· · · · Other
7219.33.00.20	· · · · · Containing more than 0.5 percent by weight of nickel	Free	29%	kg
7219.33.00.25	· · · · · Other	Free	29%	kg
	· · · Other
	· · · · Other
	· · · · · Containing more than 0.5 percent by weight of nickel
7219.33.00.36	· · · · · · Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	Free	29%	kg
7219.33.00.38	· · · · · · Other	Free	29%	kg
	· · · · · Other
7219.33.00.42	· · · · · · Containing less than 15 percent by weight of chromium	Free	29%	kg
7219.33.00.44	· · · · · · Other	Free	29%	kg
7219.33.00.35	· · · · Of high-nickel alloy steel	Free	29%	kg
	· · Not in coils
7219.33.00.45	· · · Of a width of 1370 mm or more	Free	29%	kg
	· · · Other
7219.33.00.70	· · · · Containing more than 0.5 percent but less than 24 percent by weight of nickel	Free	29%	kg
7219.33.00.80	· · · · Other	Free	29%	kg
7219.34.00	· Of a thickness of 0.5 mm or more but not exceeding 1 mm	Free	29%
	· · In coils
	· · · Other
	· · · · Containing more than 0.5 percent by weight of nickel
7219.34.00.20	· · · · · Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	Free	29%	kg
7219.34.00.25	· · · · · Other	Free	29%	kg
	· · · · Other
7219.34.00.30	· · · · · Containing less than 15 percent by weight of chromium	Free	29%	kg
7219.34.00.35	· · · · · Other	Free	29%	kg
7219.34.00.05	· · · Of high-nickel alloy steel	Free	29%	kg
7219.34.00.50	· · Not in coils	Free	29%	kg
7219.35.00	· Of a thickness of less than 0.5 mm	Free	29%
	· · In coils
	· · · Containing more than 0.5 percent but less than 24 percent by weight of nickel
7219.35.00.05	· · · · Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	Free	29%	kg
7219.35.00.15	· · · · Other	Free	29%	kg
	· · · Other
7219.35.00.30	· · · · Containing less than 15 percent by weight of chromium	Free	29%	kg
7219.35.00.35	· · · · Other	Free	29%	kg
7219.35.00.50	· · Not in coils	Free	29%	kg
7219.90.00	Other	Free	29%
	· Other
	· · Containing more than 0.5 percent by weight of nickel
7219.90.00.20	· · · Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	Free	29%	kg
7219.90.00.25	· · · Other	Free	29%	kg
	· · Other
7219.90.00.60	· · · Containing less than 15 percent by weight of chromium	Free	29%	kg
7219.90.00.80	· · · Other	Free	29%	kg
7219.90.00.10	· Of high-nickel alloy steel	Free	29%	kg

7220: Flat-rolled products of stainless steel, of a width of less than 600 mm

Code	Description	General Rate	Column 2 Rate	Units of Quantity
	Not further worked than hot-rolled
7220.11.00.00	· Of a thickness of 4.75 mm or more	Free	29%	kg
7220.12	· Of a thickness of less than 4.75 mm
7220.12.10.00	· · Of a width of 300 mm or more	Free	29%	kg
7220.12.50.00	· · Of a width of less than 300 mm	Free	34%	kg
7220.20	Not further worked than cold-rolled (cold-reduced)
7220.20.10	· Of a width of 300 mm or more	Free	29%
	· · Containing more than 0.5 percent but less than 24 percent by weight of nickel
7220.20.10.10	· · · Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	Free	29%	kg
7220.20.10.15	· · · Other	Free	29%	kg
	· · Other
7220.20.10.60	· · · Containing less than 15 percent by weight of chromium	Free	29%	kg
7220.20.10.80	· · · Other	Free	29%	kg
	· Of a width of less than 300 mm
7220.20.60	· · Of a thickness exceeding 1.25 mm	Free	34%
	· · · Other
	· · · · Containing more than 0.5 percent by weight of nickel
7220.20.60.10	· · · · · Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	Free	34%	kg
7220.20.60.15	· · · · · Other	Free	34%	kg
	· · · · Other
7220.20.60.60	· · · · · Containing less than 15 percent by weight of chromium	Free	34%	kg
7220.20.60.80	· · · · · Other	Free	34%	kg
7220.20.60.05	· · · Of high-nickel alloy steel	Free	34%	kg
7220.20.70	· · Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm	Free	34%
	· · · Other
	· · · · Containing more than 0.5 percent by weight of nickel
7220.20.70.10	· · · · · Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	Free	34%	kg
7220.20.70.15	· · · · · Other	Free	34%	kg
	· · · · Other
7220.20.70.60	· · · · · Containing less than 15 percent by weight of chromium	Free	34%	kg
7220.20.70.80	· · · · · Other	Free	34%	kg
7220.20.70.05	· · · Of high-nickel alloy steel	Free	34%	kg
	· · Of a thickness not exceeding 0.25 mm
7220.20.80.00	· · · Razor blade steel	Free	34%	kg
7220.20.90	· · · Other	Free	34%
7220.20.90.30	· · · · Containing more than 0.5 percent but less than 24 percent by weight of nickel	Free	34%	kg
7220.20.90.60	· · · · Other	Free	34%	kg
7220.90.00	Other	Free	46%
	· Containing more than 0.5 percent but less than 24 percent by weight of nickel
7220.90.00.10	· · Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	Free	46%	kg
7220.90.00.15	· · Other	Free	46%	kg
	· Other
7220.90.00.60	· · Containing less than 15 percent by weight of chromium	Free	46%	kg
7220.90.00.80	· · Other	Free	46%	kg

72210000: Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel

Code	Description	General Rate	Column 2 Rate	Units of Quantity
7221.00.00.05	Of high-nickel alloy steel	Free	11%	kg
	Other
	· Of circular cross section
	· · With a diameter of less than 14 mm
7221.00.00.17	· · · Containing less than 8 percent by weight of nickel	Free	11%	kg
7221.00.00.18	· · · Containing 8 percent or more but less than 24 percent by weight of nickel	Free	11%	kg
7221.00.00.30	· · With a diameter of 14 mm or more but less than 19 mm	Free	11%	kg
7221.00.00.45	· · With a diameter of 19 mm or more	Free	11%	kg
7221.00.00.75	· Other	Free	11%	kg

7222: Other bars and rods of stainless steel; angles, shapes and sections of stainless steel

Code	Description	General Rate	Column 2 Rate	Units of Quantity
	Bars and rods, not further worked than hot-rolled, hot-drawn or extruded
7222.11.00	· Of circular cross-section	Free	29%
	· · Other
	· · · With a maximum cross-sectional dimension of less than 152.4 mm
7222.11.00.57	· · · · Containing less than 8 percent by weight of nickel	Free	29%	kg
7222.11.00.59	· · · · Containing 8 percent or more but less than 24 percent by weight of nickel	Free	29%	kg
	· · · With a maximum cross-sectional dimension of 152.4 mm or more
7222.11.00.82	· · · · Containing less than 8 percent by weight of nickel	Free	29%	kg
7222.11.00.84	· · · · Containing 8 percent or more but less than 24 percent by weight of nickel	Free	29%	kg
7222.11.00.01	· · Electroslag or vacuum arc remelted	Free	29%	kg
7222.11.00.06	· · Of high-nickel alloy steel	Free	29%	kg
7222.19.00	· Other	Free	29%
7222.19.00.01	· · Electroslag or vacuum arc remelted	Free	29%	kg
	· · Other
7222.19.00.06	· · · Of high-nickel alloy steel	Free	29%	kg
	· · · Other
7222.19.00.52	· · · · Containing less than 8 percent by weight of nickel	Free	29%	kg
7222.19.00.54	· · · · Containing 8 percent or more but less than 24 percent by weight of nickel	Free	29%	kg
7222.20.00	Bars and rods, not further worked than cold-formed or cold-finished	Free	29%
	· Other
	· · Of a circular cross-section
	· · · With a maximum circular cross-sectional dimension of less than 18 mm
7222.20.00.41	· · · · Containing less than 8 percent by weight of nickel	Free	29%	kg
7222.20.00.43	· · · · Containing 8 percent or more but less than 24 percent by weight of nickel	Free	29%	kg
	· · · With a maximum circular cross-sectional dimension of 18 mm or more and less than 152.4 mm
7222.20.00.62	· · · · Containing less than 8 percent by weight of nickel	Free	29%	kg
7222.20.00.64	· · · · Containing 8 percent or more but less than 24 percent by weight of nickel	Free	29%	kg
	· · · With a maximum circular cross-sectional dimension of 152.4 mm or more
7222.20.00.67	· · · · Containing less than 8 percent by weight of nickel	Free	29%	kg
7222.20.00.69	· · · · Containing 8 percent or more but less than 24 percent by weight of nickel	Free	29%	kg
	· · Other
7222.20.00.71	· · · Containing less than 8 percent by weight of nickel	Free	29%	kg
7222.20.00.73	· · · Containing 8 percent or more but less than 24 percent by weight of nickel	Free	29%	kg
7222.20.00.01	· Electroslag or vacuum arc remelted	Free	29%	kg
7222.20.00.06	· Of high-nickel alloy steel	Free	29%	kg
7222.30.00	Other bars and rods	Free	29%
	· Other
	· · With a maximum cross-sectional dimension of less than 152.4 mm
7222.30.00.22	· · · Containing less than 8 percent by weight of nickel	Free	29%	kg
7222.30.00.24	· · · Containing 8 percent or more but less than 24 percent by weight of nickel	Free	29%	kg
	· · With a maximum cross-sectional dimension of 152.4 mm or more
7222.30.00.82	· · · Containing less than 8 percent by weight of nickel	Free	29%	kg
7222.30.00.84	· · · Containing 8 percent or more but less than 24 percent by weight of nickel	Free	29%	kg
7222.30.00.01	· Electroslag or vacuum arc remelted	Free	29%	kg
7222.30.00.12	· Of high-nickel alloy steel	Free	29%	kg
7222.40	Angles, shapes and sections
7222.40.30	· Hot-rolled, not drilled, not punched and not otherwise advanced	Free	10%
	· · With a maximum cross-sectional dimension of 80 mm or more
7222.40.30.25	· · · Angles	Free	10%	kg
7222.40.30.45	· · · Other	Free	10%	kg
	· · With a maximum cross-sectional dimension of less than 80 mm
7222.40.30.65	· · · Angles	Free	10%	kg
7222.40.30.85	· · · Other	Free	10%	kg
7222.40.60.00	· Other	Free	28%	kg

722300: Wire of stainless steel

Code	Description	General Rate	Column 2 Rate	Units of Quantity
7223.00.10	Round wire	Free	34%
7223.00.10.05	· Spring round wire of a kind described in statistical note 8 to this chapter	Free	34%	kg
	· Other
7223.00.10.16	· · With a diameter of less than 0.25 mm	Free	34%	kg
7223.00.10.31	· · With a diameter of 0.25 mm or more but less than 0.76 mm	Free	34%	kg
7223.00.10.46	· · With a diameter of 0.76 mm or more but less than 1.52 mm	Free	34%	kg
7223.00.10.61	· · With a diameter of 1.52 mm or more but less than 5.1 mm	Free	34%	kg
7223.00.10.76	· · With a diameter of 5.1 mm or more	Free	34%	kg
7223.00.50.00	Flat wire	Free	34%	kg
7223.00.90.00	Other	Free	34%	kg

7224: Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel

Code	Description	General Rate	Column 2 Rate	Units of Quantity
7224.10.00	Ingots and other primary forms	Free	28%
7224.10.00.05	· Of high-nickel alloy steel	Free	28%	kg
	· Other
7224.10.00.45	· · Of tool steel	Free	28%	kg
7224.10.00.75	· · Other	Free	28%	kg
7224.90.00	Other	Free	28%
	· Other
	· · Of tool steel
	· · · Of rectangular (including square) cross section
7224.90.00.15	· · · · Having a width less than four times the thickness	Free	28%	kg
7224.90.00.25	· · · · Having a width at least four times the thickness	Free	28%	kg
7224.90.00.35	· · · Other	Free	28%	kg
	· · Other
	· · · Of rectangular (including square) cross section
7224.90.00.45	· · · · Having a width less than four times the thickness	Free	28%	kg
7224.90.00.55	· · · · Having a width at least four times the thickness	Free	28%	kg
7224.90.00.65	· · · Of circular cross section	Free	28%	kg
7224.90.00.75	· · · Other	Free	28%	kg
7224.90.00.05	· Of high-nickel alloy steel	Free	28%	kg

7225: Flat-rolled products of other alloy steel, of a width of 600 mm or more

Code	Description	General Rate	Column 2 Rate	Units of Quantity
	Of silicon electrical steel
7225.11.00.00	· Grain-oriented	Free	28%	kg
7225.19.00.00	· Other	Free	28%	kg
7225.30	Other, not further worked than hot-rolled, in coils
	· Of a thickness of 4.75 mm or more
7225.30.11	· · Of tool steel	Free	29%
7225.30.11.10	· · · Of high-speed steel	Free	29%	kg
7225.30.11.80	· · · Other	Free	29%	kg
7225.30.30	· · Other	Free	28%
7225.30.30.05	· · · Of high-nickel alloy steel	Free	28%	kg
7225.30.30.50	· · · Other	Free	28%	kg
	· Of a thickness of less than 4.75 mm
7225.30.51	· · Of tool steel	Free	29%
7225.30.51.10	· · · Of high-speed steel	Free	29%	kg
7225.30.51.80	· · · Other	Free	29%	kg
7225.30.70.00	· · Other	Free	28%	kg
7225.40	Other, not further worked than hot-rolled, not in coils
	· Of a thickness of 4.75 mm or more
7225.40.11	· · Of tool steel	Free	29%
7225.40.11.10	· · · Of high-speed steel	Free	29%	kg
7225.40.11.80	· · · Other	Free	29%	kg
7225.40.30	· · Other	Free	28%
7225.40.30.05	· · · Of high-nickel alloy steel	Free	28%	kg
7225.40.30.50	· · · Other	Free	28%	kg
	· Of a thickness of less than 4.75 mm
7225.40.51	· · Of tool steel	Free	29%
7225.40.51.10	· · · Of high-speed steel	Free	29%	kg
7225.40.51.30	· · · Of ball-bearing steel	Free	29%	kg
7225.40.51.60	· · · Other	Free	29%	kg
7225.40.70.00	· · Other	Free	28%	kg
7225.50	Other, not further worked than cold-rolled (cold-reduced)
7225.50.11	· Of tool steel	Free	29%
7225.50.11.10	· · Of high-speed steel	Free	29%	kg
7225.50.11.30	· · Of ball-bearing steel	Free	29%	kg
7225.50.11.60	· · Other	Free	29%	kg
	· Other
7225.50.60.00	· · Of a thickness of 4.75 mm or more	Free	28%	kg
	· · Of a thickness of less than 4.75 mm
7225.50.70.00	· · · Heat-resisting steel	Free	29%	kg
7225.50.80	· · · Other	Free	28%
7225.50.80.10	· · · · Of high-nickel alloy steel	Free	28%	kg
7225.50.80.80	· · · · Other	Free	28%	kg
	Other
7225.91.00.00	· Electrolytically plated or coated with zinc	Free	28%	kg
7225.92.00.00	· Otherwise plated or coated with zinc	Free	28%	kg
7225.99.00	· Other	Free	28%
7225.99.00.10	· · Of high-nickel alloy steel	Free	28%	kg
7225.99.00.90	· · Other	Free	28%	kg

7226: Flat-rolled products of other alloy steel, of a width of less than 600 mm

Code	Description	General Rate	Column 2 Rate	Units of Quantity
	Of silicon electrical steel
7226.11	· Grain-oriented
7226.11.10.00	· · Of a width of 300 mm or more	Free	28%	kg
7226.11.90	· · Of a width of less than 300 mm	Free	33%
7226.11.90.30	· · · Of thickness not exceeding 0.25 mm	Free	33%	kg
7226.11.90.60	· · · Other	Free	33%	kg
7226.19	· Other
7226.19.10.00	· · Of a width of 300 mm or more	Free	28%	kg
7226.19.90.00	· · Of a width of less than 300 mm	Free	33%	kg
7226.20.00.00	Of high-speed steel	Free	37%	kg
	Other
7226.91	· Not further worked than hot-rolled
	· · Of tool steel (other than high-speed steel)
7226.91.05.00	· · · Of chipper knife steel	Free	34%	kg
	· · · Other
7226.91.15	· · · · Of a width of 300 mm or more	Free	29%
7226.91.15.30	· · · · · Of ball-bearing steel	Free	29%	kg
7226.91.15.60	· · · · · Other	Free	29%	kg
7226.91.25	· · · · Of a width of less than 300 mm	Free	34%
7226.91.25.30	· · · · · Of ball-bearing steel	Free	34%	kg
7226.91.25.60	· · · · · Other	Free	34%	kg
	· · Other
7226.91.50.00	· · · Of a thickness of 4.75 mm or more	Free	28%	kg
	· · · Of a thickness of less than 4.75 mm
7226.91.70.00	· · · · Of a width of 300 mm or more	Free	28%	kg
7226.91.80.00	· · · · Of a width of less than 300 mm	Free	33%	kg
7226.92	· Not further worked than cold-rolled (cold-reduced)
	· · Of tool steel (other than high-speed steel)
7226.92.10	· · · Of a width of 300 mm or more	Free	0.4¢/kg + 29%
7226.92.10.30	· · · · Of ball-bearing steel	Free	0.4¢/kg + 29%	kg
7226.92.10.60	· · · · Other	Free	0.4¢/kg + 29%	kg
7226.92.30	· · · Of a width of less than 300 mm	Free	34%
7226.92.30.30	· · · · Of ball-bearing steel	Free	34%	kg
7226.92.30.60	· · · · Other	Free	34%	kg
	· · Other
7226.92.50.00	· · · Of a width of 300 mm or more	Free	0.4¢/kg + 28%	kg
	· · · Of a width of less than 300 mm
7226.92.70	· · · · Of a thickness not exceeding 0.25 mm	Free	33%
7226.92.70.05	· · · · · Of high-nickel alloy steel	Free	33%	kg
7226.92.70.50	· · · · · Other	Free	33%	kg
7226.92.80	· · · · Of a thickness exceeding 0.25 mm	Free	33%
7226.92.80.05	· · · · · Of high-nickel alloy steel	Free	33%	kg
7226.92.80.50	· · · · · Other	Free	33%	kg
7226.99.01	· Other	Free	33%
7226.99.01.10	· · Electrolytically plated or coated with zinc	Free	33%	kg
7226.99.01.30	· · Otherwise plated or coated with zinc	Free	33%	kg
7226.99.01.80	· · Other	Free	33%	kg

7227: Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel

Code	Description	General Rate	Column 2 Rate	Units of Quantity
7227.10.00.00	Of high-speed steel	Free	14%	kg
7227.20.00	Of silico-manganese steel	Free	10%
7227.20.00.30	· Of welding quality wire rods of a kind described in statistical note 7 to this chapter	Free	10%	kg
7227.20.00.80	· Other	Free	10%	kg
7227.90	Other
	· Of tool steel (other than high-speed steel)
7227.90.10	· · Not tempered, not treated, and not partly manufactured	Free	12%
7227.90.10.30	· · · Of ball-bearing steel	Free	12%	kg
7227.90.10.60	· · · Other	Free	12%	kg
7227.90.20	· · Other	Free	11%
7227.90.20.30	· · · Of ball-bearing steel	Free	11%	kg
7227.90.20.60	· · · Other	Free	11%	kg
7227.90.60	· Other	Free	10%
7227.90.60.05	· · Of high-nickel alloy steel	Free	10%	kg
7227.90.60.10	· · Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter	Free	10%	kg
7227.90.60.20	· · Of welding quality wire rods of a kind described in statistical note 7 to this chapter	Free	10%	kg
	· · Of a circular cross section
7227.90.60.30	· · · With a diameter of less than 14 mm	Free	10%	kg
7227.90.60.35	· · · With a diameter of 14 mm or more but less than 19 mm	Free	10%	kg
7227.90.60.40	· · · With a diameter of 19 mm or more	Free	10%	kg
7227.90.60.90	· · Other	Free	10%	kg

7228: Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel

Code	Description	General Rate	Column 2 Rate	Units of Quantity
7228.10.00	Bars and rods, of high-speed steel	Free	32%
7228.10.00.10	· Not cold-formed	Free	32%	kg
	· Cold-formed
7228.10.00.30	· · With a maximum cross-sectional dimension of less than 18 mm	Free	32%	kg
7228.10.00.60	· · With a maximum cross-sectional dimension of 18 mm or more	Free	32%	kg
7228.20	Bars and rods, of silico-manganese steel
7228.20.10.00	· Not cold-formed	Free	28%	kg
7228.20.50.00	· Cold-formed	Free	28%	kg
	Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded
7228.30	· Of tool steel (other than high-speed steel)
7228.30.20.00	· · Of ball-bearing steel	Free	29%	kg
7228.30.40.00	· · Of chipper knife steel, not cold-formed	Free	28%	kg
7228.30.60.00	· · Other	Free	29%	kg
7228.30.80	· Other	Free	28%
7228.30.80.05	· · Of high-nickel alloy steel	Free	28%	kg
7228.30.80.10	· · Concrete reinforcing bars and rods	Free	28%	kg
	· · Other
7228.30.80.15	· · · With a diameter or cross section measuring less than 76 mm	Free	28%	kg
7228.30.80.41	· · · With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm	Free	28%	kg
7228.30.80.45	· · · With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm	Free	28%	kg
7228.30.80.70	· · · With a diameter or cross section exceeding 228 mm	Free	28%	kg
7228.40.00.00	Other bars and rods, not further worked than forged	Free	28%	kg
7228.50	Other bars and rods, not further worked than cold-formed or cold-finished
7228.50.10	· Of tool steel (other than high-speed steel)	Free	29%
	· · Other
	· · · With a maximum cross-sectional dimension of less than 18 mm
7228.50.10.20	· · · · Of round or rectangular cross section with surfaces ground, milled or polished	Free	29%	kg
7228.50.10.40	· · · · Other	Free	29%	kg
	· · · With a maximum cross-sectional dimension of 18 mm or more
7228.50.10.60	· · · · Of round or rectangular cross section with surfaces ground, milled or polished	Free	29%	kg
7228.50.10.80	· · · · Other	Free	29%	kg
7228.50.10.10	· · Of ball-bearing steel	Free	29%	kg
7228.50.50	· Other	Free	28%
7228.50.50.05	· · Of high-nickel alloy steel	Free	28%	kg
	· · Other
7228.50.50.15	· · · With a diameter or cross section measuring less than 76 mm	Free	28%	kg
7228.50.50.40	· · · With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm	Free	28%	kg
7228.50.50.70	· · · With a diameter or cross section exceeding 228 mm	Free	28%	kg
7228.60	Other bars and rods
7228.60.10	· Of tool steel (other than high-speed steel)	Free	29%
7228.60.10.30	· · Of ball-bearing steel	Free	29%	kg
7228.60.10.60	· · Other	Free	29%	kg
	· Other
7228.60.60.00	· · Not cold-formed	Free	28%	kg
7228.60.80.00	· · Cold-formed	Free	28%	kg
7228.70	Angles, shapes and sections
7228.70.30	· Hot-rolled, not drilled, not punched and not otherwise advanced	Free	10%
	· · Other
	· · · With a maximum cross-sectional dimension of 76 mm or more
7228.70.30.20	· · · · Angles	Free	10%	kg
7228.70.30.41	· · · · Other	Free	10%	kg
	· · · With a maximum cross-sectional dimension of less than 76 mm
7228.70.30.60	· · · · Angles	Free	10%	kg
7228.70.30.81	· · · · Other	Free	10%	kg
7228.70.30.10	· · U, I, H and T sections	Free	10%	kg
7228.70.60.00	· Other	Free	28%	kg
7228.80.00.00	Hollow drill bars and rods	Free	30%	kg

7229: Wire of other alloy steel

Code	Description	General Rate	Column 2 Rate	Units of Quantity
7229.20.00	Of silico-manganese steel	Free	33%
	· Round, with a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon, more than 0.9 percent of manganese, and more than 0.6 percent of silicon, and suitable for electric arc welding
7229.20.00.10	· · Plated or coated with copper	Free	33%	kg
7229.20.00.15	· · Other	Free	33%	kg
7229.20.00.90	· Other	Free	33%	kg
7229.90	Other
7229.90.05.00	· Of high-speed steel	Free	37%	kg
	· Other
7229.90.10.00	· · Flat wire	Free	33%	kg
7229.90.50	· · Round wire	Free	33%
	· · · With a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon and more than 0.3 percent of nickel or more than 0.08 percent of molybdenum, and suitable for electric arc welding
7229.90.50.06	· · · · Plated or coated with copper	Free	33%	kg
7229.90.50.08	· · · · Other	Free	33%	kg
	· · · Other
7229.90.50.16	· · · · With a diameter of less than 1.0 mm	Free	33%	kg
7229.90.50.31	· · · · With a diameter of 1.0 mm or more but less than 1.5 mm	Free	33%	kg
7229.90.50.51	· · · · With a diameter of 1.5 mm or more	Free	33%	kg
7229.90.90.00	· · Other wire	Free	33%	kg

Sections

I: Live Animals; Animal Products

II: Vegetable Products

III: Animal or Vegetable Fats and Oils; Prepared Edible Fats; Animal or Vegetable Waxes

IV: Prepared Foodstuffs; Beverages, Spirits, Vinegar; Tobacco

V: Mineral Products

VI: Products of the Chemical or Allied Industries

VII: Plastics and Articles Thereof; Rubber and Articles Thereof

VIII: Raw Hides, Skins, Leather, Furskins, Saddlery and Harness; Travel Goods, Handbags; Articles of Animal Gut

IX: Wood, Wood Charcoal, Cork, Articles of Wood, Basketware

X: Pulp of Wood, Paper or Paperboard, Articles Thereof

XI: Textiles and Textile Articles

XII: Footwear, Headgear, Umbrellas, Feathers, Artificial Flowers; Articles of Human Hair

XIII: Articles of Stone, Plaster, Cement, Asbestos, Ceramic Products, Glass

XIV: Pearls, Precious Stones and Metals, Imitation Jewelry, Coins

XV: Base Metals and Articles of Base Metal

XVI: Machinery, Mechanical Appliances, Electrical Equipment, Sound/TV Recorders and Parts

XVII: Vehicles, Aircraft, Vessels, Transport Equipment

XVIII: Optical, Photographic, Cinematographic, Measuring, Precision Instruments, Clocks, Watches, Musical Instruments

XIX: Arms and Ammunition; Parts and Accessories

XX: Miscellaneous Manufactured Articles

XXI: Works of Art, Collectors' Pieces and Antiques

XXII: Special Classification Provisions, Temporary Legislation, Modifications per Trade Agreements

Chapter 72: Iron and steel

7201: Pig iron and spiegeleisen in pigs, blocks or other primary forms

Nonalloy pig iron containing by weight 0.5 percent or less of phosphorus

Nonalloy pig iron containing by weight more than 0.5 percent of phosphorus

Alloy pig iron

Spiegeleisen

7202: Ferroalloys

Containing by weight more than 2 percent but not more than 4 percent of carbon

Containing by weight more than 4 percent of carbon

Containing by weight not more than 1 percent of carbon

Containing by weight more than 1 percent but not more than 2 percent of carbon

Containing by weight more than 3 percent of calcium

Other

Containing by weight more than 80 percent but not more than 90 percent of silicon

Containing by weight more than 90 percent of silicon

Other

Containing by weight over 2 percent of magnesium

Other

Ferrosilicon manganese

Containing by weight more than 4 percent of carbon

Containing by weight more than 3 percent of carbon

Other

Containing by weight more than 0.5 percent of carbon

Other

Ferrosilicon chromium

Ferronickel

Ferromolybdenum

Ferrotungsten and ferrosilicon tungsten

Ferrotitanium and ferrosilicon titanium

Ferrovanadium

Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon

Other

Ferrozirconium

Calcium silicon

Other

Ferrophosphorus

Other

7203: Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 percent, in lumps, pellets or similar forms

Ferrous products obtained by direct reduction of iron ore

Other

7204: Ferrous waste and scrap; remelting scrap ingots of iron or steel

Waste and scrap of cast iron

Of stainless steel

Other

Waste and scrap of tinned iron or steel

Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles

No. 1 bundles

No. 2 bundles

Borings, shovelings and turnings

Other

Other

No. 1 heavy melting

No. 2 heavy melting

Cut plate and structural

Shredded

Other

Remelting scrap ingots